<html>
    <head>
      <base href="https://bugzilla.rosalinux.ru/">
    </head>
    <body>
      <p>
        <div>
            <b><a class="bz_bug_link 
          bz_status_CONFIRMED "
   title="CONFIRMED - kernel-5.10-generic.x86_64 5.10.176-1 panic at boot"
   href="https://bugzilla.rosalinux.ru/show_bug.cgi?id=13189#c9">Comment # 9</a>
              on <a class="bz_bug_link 
          bz_status_CONFIRMED "
   title="CONFIRMED - kernel-5.10-generic.x86_64 5.10.176-1 panic at boot"
   href="https://bugzilla.rosalinux.ru/show_bug.cgi?id=13189">bug 13189</a>
              from <span class="vcard"><a class="email" href="mailto:abfonly&#64;gmail.com" title="abfonly &lt;abfonly&#64;gmail.com&gt;"> <span class="fn">abfonly</span></a>
</span></b>
        <pre>(In reply to Mikhail Novosyolov from <a href="show_bug.cgi?id=13189#c7">comment #7</a>)
<span class="quote">&gt; By the way, does your r8168 ethernet network card work well with 6.1, maybe
&gt; better or worse than with 5.10/5.15?</span >

┌─[ symbianflo &#64; localhost ] - [ RosalinuxRo ] 
└─[ MRB:aint-no-shit $]: sudo lshw -class network -short
H/W path         Device      Class          Description
=======================================================
/0/100/1c.2/0    wlp2s0      network        Wireless 7260
/0/100/1c.3/0.1  enp3s0f1    network        RTL8111/8168/8411 PCI Express
Gigabit Ethernet Controller

┌─[ symbianflo &#64; localhost ] - [ RosalinuxRo ] 
└─[ MRB:aint-no-shit $]: sudo ethtool wlp2s0
Settings for wlp2s0:
        Link detected: yes
┌─[ symbianflo &#64; localhost ] - [ RosalinuxRo ] 
└─[ MRB:aint-no-shit $]: sudo ethtool enp3s0f1
Settings for enp3s0f1:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: Symmetric Receive-only
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
        Link partner advertised pause frame use: Symmetric Receive-only
        Link partner advertised auto-negotiation: Yes
        Link partner advertised FEC modes: Not reported
        Speed: 100Mb/s
        Duplex: Full
        Auto-negotiation: on
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        MDI-X: Unknown
        Supports Wake-on: pumbg
        Wake-on: g
        Current message level: 0x00000033 (51)
                               drv probe ifdown ifup
        Link detected: yes
┌─[ symbianflo &#64; localhost ] - [ RosalinuxRo ] 
└─[ MRB:aint-no-shit $]: sudo ethtool -i enp3s0f1
driver: r8168
version: 8.051.02-NAPI
firmware-version: rtl8411-2_0.0.1 07/08/13
expansion-rom-version: 
bus-info: 0000:03:00.1
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no
┌─[ symbianflo &#64; localhost ] - [ RosalinuxRo ] 
└─[ MRB:aint-no-shit $]: sudo ethtool -i wlp2s0
driver: iwlwifi
version: 6.1.20-generic-2rosa2021.1-x86_
firmware-version: 17.3216344376.0 7260-17.ucode
expansion-rom-version: 
bus-info: 0000:02:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no

Yes both ethernet and wireless works properly, I can't see 
diffs confronted with 5-10-x

and 5-15 that I suppose to run on 2023.1, sorry I don't know I'm running 6.1 
on 2023.1 also.</pre>
        </div>
      </p>


      <hr>
      <span>You are receiving this mail because:</span>

      <ul>
          <li>You are the QA Contact for the bug.</li>
          <li>You are the assignee for the bug.</li>
      </ul>
    </body>
</html>